0
Owner's of the Onkyo Stereo Receiver TX-NR3008 gave it a score of 0 out of 5. Here's how the scores stacked up:
57
En
Direct
■ Analog
Subwoofer
`Off
:
Analog audio signals (bass signals) are not output.
`On:
Analog audio signals (bass signals) are output.
This setting determines whether or not analog audio sig-
nals (bass signals) are output from front speakers when the
Pure Audio or Direct listening mode is selected.
Note
•If the “Subwoofer” setting is set to “No” (➔ 51), this setting
cannot be selected.
■ DSD
DAC Direct
`Off
:
DSD signals are processed by the DSP.
`On:
DSD signals are not processed by the DSP.
This setting determines whether or not DSD (Super Audio
CD) audio signals are passed through the DSP for A/V
Sync, delay, etc., processing when the Pure Audio or
Direct listening mode is selected.
Note
• Once you have selected “Ye s”, only DAC Direct will be available
for selection. “DSD Direct” will appear on the display.
Items can be set individually for each input selector.
Main menu Source Setup
Audyssey
When Audyssey MultEQ
®
XT32
Room Correction and
Speaker Setup is complete, the “Equalizer” (➔ 53) will
be set to “Audyssey” and the “Dynamic EQ” will be set
to “On”.
Audyssey settings cannot be adjusted while Speakers B is
selected.
■ Dynamic EQ
`Off
:
Audyssey Dynamic EQ
®
off.
`On:
Audyssey Dynamic EQ on.
The Dynamic EQ indicator will light (➔ 9).
With Audyssey Dynamic EQ, you can enjoy great
sound even when listening at low volume levels.
Audyssey Dynamic EQ solves the problem of deterio-
rating sound quality as volume is decreased by taking
into account human perception and room acoustics. It
does so by selecting the correct frequency response and
surround volume levels moment-by-moment so that the
content sounds the way it was created at any volume
level — not just at reference level.
■ Reference Level
Audyssey Dynamic EQ Reference Level Offset
`0dB
:
It should be used when listening to movies.
`5dB:
Select this setting for content that has a very wide
dynamic range, such as classical music.
`10dB:
Select this setting for jazz or other music that has a
wider dynamic range. This setting should also be
selected for TV content as that is usually mixed at
10 dB below film reference.
`15dB:
Select this setting for pop/rock music or other pro-
gram material that is mixed at very high listening
levels and has a compressed dynamic range.
Movies are mixed in rooms calibrated for film refer-
ence. To achieve the same reference level in a home the-
ater system each speaker level must be adjusted so that
–30 dBFS band-limited (500 Hz to 2000 Hz) pink noise
produces 75 dB sound pressure level at the listening
position. A home theater system automatically cali-
brated by Audyssey MultEQ XT32 will play at refer-
ence level when the master volume control is set to the
0 dB position. At that level you can hear the mix as the
mixers heard it.
Audyssey Dynamic EQ is referenced to the standard
film mix level. It makes adjustments to maintain the ref-
erence response and surround envelopment when the
volume is turned down from 0 dB. However, film refer-
ence level is not always used in music or other non-film
content. Audyssey Dynamic EQ Reference Level Offset
provides three offsets from the film level reference
(5 dB, 10 dB, and 15 dB) that can be selected when the
mix level of the content is not within the standard.
Note
• If “Dynamic EQ” setting is set to “Off”, this setting cannot be
selected.
Source Setup
Preparation
Press the input selector buttons to select an input source.
Find Your Products By Category
Please Login
