0
Owner's of the Onkyo Stereo Receiver TX-NR3008 gave it a score of 0 out of 5. Here's how the scores stacked up:
49
En
Note
• For composite video, S-Video, and component video upconver-
sion for the HDMI output, the “Monitor Out” setting must be
set to other than “Analog” (➔ 47), and the “HDMI Input” set-
ting must be set to “-----”. See “Video Connection Formats”
for more information on video signal flow and upconversion
(➔ 25).
• If no video component is connected to HDMI output (even if the
HDMI input is assigned), the AV receiver selects the video
source based on the setting of “Component Video Input”.
•When an HDMI IN is assigned to an input selector as explained
here, the same HDMI IN will be set as a priority in the “Digital
Audio Input” (➔ 50). In this case, if you want to use the coaxial
or optical audio input, make the selection in the “Audio Selec-
tor” in the Home menu (➔ 68).
•“TUNER” selector cannot be assigned and is fixed at the
“-----” option.
• If you connect a component (such as UP-A1 Dock that seated
iPod) to UNIVERSAL PORT jack, you cannot assign any input
to “PORT” selector.
• Do not assign the component connected with the HDMI input to
“TV/CD” selector when you set “TV Control” setting to “On”
(➔ 65). Otherwise, appropriate CEC (Consumer Electronics
Control) operation will not be guaranteed.
Component Video Input
If you connect a video component to a component video
input, you must assign that input to an input selector. For
example, if you connect your Blu-ray Disc/DVD player to
COMPONENT VIDEO IN 2, you must assign “IN 2” to
the “BD/DVD” input selector.
If you’ve connected your TV to the AV receiver with a
component video cable, you can set the AV receiver so
that composite video and S-Video sources are upcon-
verted
*
and output by the COMPONENT VIDEO MONI-
TOR OUT
*1
. You can set this for each input selector by
selecting the “-----” option.
*1
This applies only when “Monitor Out” setting is set to “Ana-
log” (➔ 47).
Here are the default assignments.
■ BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, AUX,
TAPE, TV/CD, PHONO, PORT
`IN 1, IN 2, IN 3:
Select a corresponding component video input that
the video component has been connected.
`-----:
Select if you are using HDMI output, rather than the
COMPONENT VIDEO MONITOR OUT, for the
output from composite video, S-Video, and compo-
nent video sources.
Note
• For composite video and S-Video upconversion for the COM-
PONENT VIDEO MONITOR OUT, the “Monitor Out” set-
ting must be set to “Analog” (➔ 47), and the “Component
Video Input” setting must be set to “-----”. See “Video Con-
nection Formats” for more information on video signal flow and
upconversion (➔ 25).
• If not connected to the same output you have selected in the
“Monitor Out” setting, the “Monitor Out” setting will be auto-
matically switched to “Analog” (➔ 47).
•“TUNER” selector cannot be assigned and is fixed at the
“-----” option.
• If you connect a component (such as UP-A1 Dock that seated
iPod) to the UNIVERSAL PORT jack, you cannot assign any
input to “PORT” selector.
Input selector Default assignment
BD/DVD IN 1
VCR/DVR - - - - -
CBL/SAT IN 2
GAME IN 3
PC -----
AUX -----
TAPE -----
TUNER ----- (Fixed)
TV/CD -----
PHONO -----
PORT -----
IN
OUT
Composite video, S-Video
Composite video, S-Video
Component video
Component video
Find Your Products By Category
Please Login
