0
Owner's of the Onkyo Stereo Receiver AV Receiver gave it a score of 0 out of 5. Here's how the scores stacked up:
Connections
En-23
Note
*1
TX-NR5010 only.
*2
Do not connect the AV receiver’s USB port to a USB port on
your computer. Music on your computer cannot be played
through the AV receiver in this way.
*3
Only the front-panel USB input is compatible with
iPod/iPhone.
*4
When the USB input is selected, you can input video signals
from the AUX INPUT VIDEO jack. Video signals input from
AUX INPUT VIDEO will be output from MONITOR OUT V,
COMPONENT VIDEO MONITOR OUT, and the HDMI
output jacks.
Select which of COMPONENT VIDEO MONITOR OUT
and the HDMI output jacks will output the video signal in the
“Monitor Out” setting (➔ page 63).
*5
Connect a turntable (MM) that has a built-in phono preamp to
TV/CD IN, or connect it to PHONO IN with the phono
preamp turned off. If your turntable (MM) doesn’t have a
phono preamp, connect it to PHONO IN. If your turntable has
a moving coil (MC) type cartridge, you’ll need a commercially
available MC head amp or MC transformer to connect to
PHONO IN. See your turntable’s manual for details.
If your turntable has a ground wire, connect it to the AV
receiver’s GND screw. With some turntables, connecting the
ground wire may produce an audible hum. If this happens,
disconnect it.
*6
When you connect your personal computer to PC IN and select
the PC input selector, the video of the personal computer is
output from the HDMI outputs. However, if you have assigned
the HDMI inputs to the PC input selector, the AV receiver will
output signals received from the HDMI inputs instead of
signals from PC IN, based on the priority order of HDMI >
component video > PC IN (analog RGB). To have the signals
output from PC IN, select “-----” for “PC” in the “HDMI
Input” setting (➔ page 64).
• With connection , you can enjoy Dolby Digital and
DTS. (To listen in Zone 2/3 as well, use and .)
• With connection , you can enjoy analog video from
external components while you are in Zone 2.
• With connection , you can enjoy audio from external
components while you are in Zone 2/3.
• With connection , if your Blu-ray Disc/DVD player
has both the main stereo and multichannel outputs, be
sure to connect the main stereo.
No. Jack/Port Components
COMPONENT VIDEO
MONITOR OUT TV, projector, etc.
IN 1 (BD/DVD) Blu-ray Disc/DVD player,
RI dock
✔
IN 2 (CBL/SAT) Satellite/cable set-top box,
RI dock, etc.
✔
ZONE 2 OUT TV, projector, etc.
PC IN
*6
Personal computer
Find Your Products By Category
Please Login
