4.8
Owner's of the Onkyo Stereo Receiver AV Receiver gave it a score of 4.8 out of 5. Here's how the scores stacked up:
52
En
Zone 2
In addition to the main listening room, you can also enjoy playback in another room, which we call Zone 2. For either of
the rooms, you can specify a different input source.
Connecting the Zone Speakers to an
Additional Amplifier
This setup allows 5.1-channel playback in your main
listening room and 2-channel stereo playback in Zone 2.
Note
• The volume of Zone 2 must be set on the Zone 2 amp.
■ Operating on the AV receiver
■ Operating on the remote controller
To control Zone 2, you must press ZONE2 on the remote
controller first.
Note
• With Zone 2, only analog input sources are processed. Digital
input sources are not output. If no sound is heard when an input
source is selected, verify that the source is connected to an
analog input.
• You cannot select different AM or FM radio stations for your
main room and Zone 2. The same AM/FM radio station will be
heard in each room. Namely, if you have selected an FM station
for the main room, that station will also be output in Zone 2.
• When you have selected either NET or USB as the input selector
for the main room, the same one will be set for Zone 2.
• When the input selector of Zone 2 is selected, the power
consumption in standby mode slightly increases.
• While Zone 2 is on, functions will not work.
• When setting the AV receiver to standby mode while Zone 2 is
active, the Z2 indicator is dimly lit.
• Activating Zone 2 in the main room when the listening mode is
set to Pure Audio will automatically switch it to Direct.
Making Zone 2 Connections
Controlling Zone 2 Components
R
L
IN
Main room
TV
Zone 2
AV receiver
Receiver/
integrated amp
ZONE 2 OFF
Input selector buttons
1
To turn on Zone 2 and select an input source, press
ZONE 2 followed by an input selector button
within 8 seconds.
The Z2 (Zone 2) indicator lights.
To select AM or FM, press the TUNER input selector
and ZONE 2 repeatedly.
To select the same source as the main room’s, press
ZONE 2 twice. “Z2 Selector: Source” appears on
the display.
To turn off Zone 2, press OFF.
The zone is turned off.
1
Press ZONE2, then point the remote controller at
the AV receiver and press RECEIVER.
The Z2 (Zone 2) indicator lights.
2
To select an input source for Zone 2, press ZONE2,
followed by INPUT SELECTOR.
To select AM or FM, press the TUNER input
selector and ZONE2 repeatedly.
To turn off Zone 2, press ZONE2, followed by
RECEIVER.
The zone is turned off.
RECEIVER
ZONE2
INPUT
SELECTOR
Find Your Products By Category
Please Login
