0

Out of 0 Ratings

Owner's of the Electrolux Range Electrolux Gas Range gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 52
 
38
Self-clean
Setting self-clean
A self-cleaning oven automatically cleans itself
using much higher temperatures than those used
for cooking. The self-clean feature eliminates soils
completely or reduces them to a fine powdered ash
that you can later easily wipe away with a damp
cloth.
The self-clean function provides 3 different clean
time settings for self-cleaning. Set clean for 2 hours
for light, 3 hours for normal or 4 hours for heavier
soils.
1. The oven should be empty and all
oven racks removed. Remove all
items from the cooktop. Be sure the
oven door is completely closed.
2. Press self clean once for a 3-hour
clean time (Figure 1); twice for a 4-
hour clean time (Figure 2) or 3
times for a 2-hour clean time
(Figure 3).
3. Press START.
To start self-clean:
Example
Step Press
Fig. 3
Fig. 1
Fig. 2
A self-clean cycle will not start if the control
lock feature is active.
When the self-clean feature is active, you may
check the amount of clean time remaining by
pressing the self-clean keypad once.
If a self-clean cycle was started but did not
finish due to a power failure, your oven may not
have completely cleaned.
NOTES
Once active, the door lock motor will begin locking
the oven door. "door Loc" (Figure 4) will appear in
the display. DO NOT try to open the oven door
when the "door Loc" message is on (allow about
15 seconds for the oven door to completely lock).
DO NOT force the oven door open. This could
damage the door locking system. Once the oven
door is locked the "door Loc" message will turn off
and "CLn" (Figure 5) will remain in the display for
the entire self-clean cycle.
Fig. 4 Fig. 5
When the self clean cycle has finished:
1. The time of day and "Hot" will show in the
display (Figure 6).
2. Once the oven has cooled (about 1 hour) and
"Hot" is no longer displayed, the "door OPn"
message will appear (Figure 7). When this
message turns OFF the door has finished
unlocking.
3. When the oven is cool, wipe away any residue
or powdered ash from the oven interior using a
damp cloth or paper towel.
Fig. 6
Fig. 7