0
Owner's of the Friedrich Air Conditioner SQ10N10 gave it a score of 0 out of 5. Here's how the scores stacked up:
13
the or buttons to change the setting.
DIM Function
There are three separate display brightness levels, AUTO, 20% and full
(100%). To change the DIM setting, press the Power button for three
seconds.
FRR192
The 1 indicates a DIM setting of Auto (factory default on new units). Use
FRR193
The 2 indicates a DIM setting of 20%. Press the TIMER SET button within
15 seconds to save the setting. Button inactivity for more than 15 seconds
causes the display to time out and return to the normal operating display.
SET POINT
F
AUTO FAN
Alerts
When the ¿ lter needs to be cleaned or replaced, the
CHECK
FILTER
icon displays.
CHECK
FILTER
FRR118
The alert can be dismissed by pressing the
FAN
MODE
and for 3 seconds.
FRR194
The 3 indicates a DIM setting of 100% (full brightness). Press the TIMER
SET (Refer to Figure 8) button within 15 seconds to save the setting.
Button inactivity for more than 15 seconds causes the display to time out
and return to the normal operating display.
TIMER
SCHEDULE
SET POINT
F
AUTO FAN
SET POINT
F
AUTO FAN
Wait Icon
The wait icon illuminates when the compressor lockout is active.
FRR120
Control Panel Lock
To lock the front panel controls, press and hold the
FAN
SPEED
+ buttons
for 3 seconds. The lock icon
During lockout, none of the control panel buttons will operate.
illuminates to indicate the locked status.
FRR116
To unlock, press and hold the
seconds.
+ buttons simultaneously for 3
TIMER
SCHEDULE
TIMER
SCHEDULE
FAN
SPEED
SET POINT
F
AUTO FAN
SET POINT
F
AUTO FAN
External Control Status
SMART
WiFi Connection
$MART
FRR125
$MART
The icon illuminates to indicate that the system is receiving a Wi-Fi
connection (for more information, see page 10).
FRR126
The icon illuminates to indicate that the system is being controlled
remotely, such as from a smart grid from a power company (for more
information, see page 12).
Find Your Products By Category
Please Login
